Self-initiated demo by Flow Lab. Northgate Metalworks is a fictional company. A site with price calculation for your business: from $500. How it was built and what it costs · What the monthly plan covers

Northgate MetalworksSheet metal, Ashfield

Sheet metal parts made to your dimensions. Get the price right away.

We cut, form and weld sheet metal. Enter your part's dimensions below and the site gives you an estimated price right away. No trip to the shop needed.

Request a quote

Shop phone: +1 207 555 0143, weekdays 6:30 a.m. to 4:30 p.m.

Flat pattern of a two-bend mounting bracket A 390 by 220 millimetre blank in 2 millimetre mild steel with four 9 millimetre holes, two corner reliefs and two bend lines marked in yellow. 390.0 220.0 214.0 2.0 CRS 2 bends 90 deg
Bracket NG-2291, flat pattern Yellow lines are bends Dimensions in mm
Laser bed
3000 × 1500 mm
Thickness
0.8–6.0 mm
Press brake
110 t, 3.1 m
Standard tolerance
±0.25 mm
Quote turnaround
1 business day

Services

Four processes under one roof, so a bracket does not travel across town between operations.

  • Fiber laser cutting 0.8–6.0 mm

    Nitrogen for stainless and aluminum, oxygen for thicker mild steel. We handle the nesting: send one part and we fit it into a sheet that's already running.

  • Press brake forming up to 3.1 m

    Air bending with a measured bend deduction per material and thickness, so the flat pattern you get back matches the part you wanted.

  • Welding and assembly MIG, TIG, spot

    Weldments up to 1.8 m on the table, fixtured when the run is worth it. Dressed and blended where the drawing says so.

  • Finishing powder, zinc, deburr

    Deburring in house. Powder coat and clear zinc plate go to two plants we work with; the lead time on your quote already includes their queue.

Stock we keep on the floor
Mild steel CRS 10080.8–6.0 mm
Stainless 304, 2B finish0.8–5.0 mm
Aluminum 5052-H321.0–6.0 mm
Tight tolerance option±0.10 mm
Smallest job we take1 part, $150
Files we readDXF, DWG, STEP, PDF

No drawing yet? Send a dimensioned sketch and a photo. We have quoted plenty of parts that started life on the back of a packing slip.

From the drawing to the part.

  1. 01The laser cuts the 390 × 220 mm blank from 2.0 mm mild steel.
  2. 02Four 9 mm holes and the slot go in the same pass.
  3. 03The part is checked against the drawing dimensions.
  4. 04Two bend lines, each formed to 90° on the press brake.

How a quote happens

Five steps, in this order, every time. We hold ourselves to every timeline below.

  1. You send the part details

    The form below, or email with a DXF or STEP file. Quantity and finish matter more than a perfect drawing.

    same day

  2. We check manufacturability

    Hole size against thickness, bend reliefs, flange lengths the brake can actually reach. If something will fight the tooling, you hear about it now and not after the first article.

    within 1 business day

  3. You get a firm quote

    Unit price at your quantity, price at the next quantity break, lead time, and any change we suggest to the part with the money it saves.

    1 business day

  4. First article before the run

    On anything over 25 parts we cut and form one, measure it, and send you the report. The run starts when you say the part is right.

    days 2 to 3

  5. Production and delivery

    Standard work ships in 6 business days from approval. Finishing adds 2. You get the packing list and the measured report with the parts.

    6–10 business days

Price a part now

Fill in the fields and the estimate updates as you type. It runs on our own shop rates, so there is no waiting on a salesperson.

The part

millimeters, from stock

mm, max 3000

mm, max 1500

The work

hits on the brake, 0 if flat

optional, tells us whether to price a rush

Where to send it

optional

optional, up to 600 characters

We use what you type to price the job and reply. Nothing else.

Your RFQ is ready to send

NG-000000-AA00

Your quote arrives within one business day.


Open in email

On the real site this goes straight to the shop inbox and the job board. This demo page has no server behind it, so it hands the finished RFQ back to you instead of pretending to send it.

Straight answers

Honest answers, even when they cost us the job. Better to know now than three weeks in.

What do you need before you can quote?

A DXF or STEP file, the quantity, the material and the finish. A PDF drawing works too, but the quote takes an hour longer because we redraw the flat pattern. If the part is a rectangle with holes, the form above is enough.

What do you not do?

No castings, no forgings, no injection molding, no machining from solid. We do not anodize in house. We do not take on painting to an automotive appearance spec. Tube laser work goes to a shop we trust, and we always tell you when it does.

Will you take a single part?

Yes. Setup still has to be paid for, so a one-off costs more per part than fifty, and our job minimum is $150. Prototypes that turn into production runs are most of our work.

How fast can you go if it is urgent?

Standard work ships in 6 business days. We can pull a job forward when the machine has room, for a 25 percent surcharge. The estimate above adds it when your date is earlier than our normal lead time. If we cannot make your date, we tell you the same day rather than book it and hope.

Who owns the drawings and the flat patterns?

You do. We keep your files to run repeat orders and we do not cut your parts for anyone else. Ask us to delete them after the job, and we will.

How accurate is the estimate on this page?

Close enough to decide with, not close enough to order against. It uses our machine rates, cutting speeds and setup times, but it assumes a plain part. Deep flanges, close-together bends and thin webs all cost more than the calculator shows.